Langsung ke konten utama

Decorating Our Staircase with Book Spines - A Cricut Project


I still have a lot of painting to do - the sides of thesteps, and the top of every other step yet...  but the vinyl is done!
FAQS:

  • Sketch out a basic plan for the books & order. (I asked all of my kids what their favorite books were growing up, each of their favorites are on here.)
  • Paint the steps with craft paint - the 50 cents a bottle stuff from wal-mart.  Mix colors together to get the right shades.  Often I add brown or grey or black - just a drop - to get the shade I want.
  • Measure each step.  Especially if you have an old house.  Not only are ours not all the same size, but sometimes one step isn't the same size the whole way across.  :-)
  • I used Dollar Tree Contact paper as my transfer tape
  • I used vinyl.  Orcal 651.
  • No, I did not seal any of this.  This farm has been in the family for generations, and hopefully will be for generations more.  My daughter in laws (or grand daughter in laws) will have enough reasons to curse me without me sealing  vinyl to the steps.  In my experience Orcal vinyl holds up VERY well all on it's own anyway.
  • Fontlab pad is WONDERFUL for this project!  You do not need to install all the fonts.  Just download them, choose Open in the Fontlab pad and browse to the zip file.  

TIP - if you are painting the top of your steps, if you paint every other step (so you can walk on the unpainted steps) before bed, set a fan up aimed at the steps, use a dog gate to remind anyone who gets up in the middle of the night that you painted, and lock the cat in a room, you MIGHT be able to get this done with no one stepping on the wet paint.  Good luck.  :-)

To sketch out my basic design, I opened a publisher document (You could do this in google docs too) and crated a table 12 high - one for each step.  Then I stuck in random photos for inspiration.



When designing each step in design space, I started with a rectangle 6 inches high by 33 inches wide.  Then I added the design for the step on top of that rectangle, to make sure I got the sizes and spacing correct.  It's a pain to work with something that wide - I would take my screen view down to 50% to view the entire thing, then size back up to 100% to work, repeatedly.



LITERALLY step by step, the fonts and graphics I used:



  • font is book antiqua
  • For the center, I created a beige rectangle, then created another rectangle and sliced it out of the top.  Added text.
  • For the author plate, a black rectangle, a beige rectangle, and then I attached the text of the authors name to the beige box.  This will cut the letters out of the beige box - a quick short cut for the slice option.
  • I have a TON of black scraps.  I know I could piece them all together and place everything on the matt to cut..  but I find it faster to just change the color of each black piece in design space, so that it sends each piece to a different mat.  Then I feed a new mat in with the correct size scrap.  
Our tiny local library had Jeff Shaara come visit as part of a book tour in our area.  Because he was also at the larger libraries around us, very few people showed up at our tiny country library.  Our family got to spend so much time with Mr Shaara, and they learned so much from him!  One of our boys became a huge fan of his books as well!

Note - I ended up taking this down and redoing all of the colors - these colors were too dark on the dark step and could not be seen. 




For this one, and several others, I did not even install the fonts I was using.  Did you know that if you use fontlab pad, the fonts do not even have to be installed?  Not even unzipped.  Simply choose open, and browse to the zip file.  This is great for fonts like this one, that I love, but do not need cluttering up my fonts list most days. (More about using Fontlab Pad with design space)

I kept the Dafont website page open so I could see the font key, and typed:
012
NAR$IA



saved, then uploaded to Design Space.  It saves as an SVG,so super easy, no clean up needed.



My favorite book series of all time.  I read all of the books while on bed-rest, pregnant with the twins.  (Who are now 25...)

  • Font is Broadway (I have no idea where I got it - it was one of my system fonts, I don't see it on Dafont)
  • For the yellow lines, I made a stencil and painted them on
  • For the graphic, I took a silhouette off one of the book covers and cleaned it up a bit in design space.





  • Sherlock Font is Verve
  • clipart is from a google search




  • Trixie Belden font is Cooper Black
  • Kathryn Kenny font is Book Antiqua






  • JK Rowling is in the Cricut Sans font
  • Harry Potter is Harry P from Dafont
  • I used purple vinyl for the diamonds, because I have a LOT of purple vinyl for some reason.
  • I used Gold foil Orcal for the letters.  I tried cricuts gold foil first, and had to throw it out - I couldn't work with it.  The Orcal was great - no problems at all.
  • When I placed this on the steps, I decided I liked the design done a bit differently - so I spaced the Harry Potter across the diamonds, and put the JK Rowling on the side.
  • The "visable space" for this step was 6 inches tall - but I made the diamonds 5.75.  I'm happy with that.  





  • Eragon Font is Inheritance
  • Remember that you do NOT need to install fonts to use them in fontlab pad!  Simply download the zip file, then open fontlab pad and choose "open" and browse to the zip file.  Save as svg when done.



  • The monsters are google images.  Google Where The Wild Things Are svg and lots of silhouettes will pop up - easy clean up!
  • Where The Wild Things Are is also a google image cleaned up -I couldn't find a font that was close enough for me to like it.
  • "Story And Pictures by" are in Obelix Pro
Update - I used cricut vinyl for this one, because I liked the shades I happened to have from a starter pack I bought early on.  The next morning I came down the stairs to find half the letters and one of the monsters had fallen off.  I do NOT recommend Cricut vinyl for this project.  I replaced it with Orcal and that is staying put.
Label:

Komentar

Posting Komentar

Postingan populer dari blog ini

Fonts With Tails (Glyphs) Cheat Sheet

Glyphs are extra characters in fonts.  For fonts like Samantha (a paid font - there is no free version) you have to use a character map to access the extra swirls. There are a few fonts, such as I Love Glitter, where you can quickly add swirls (nothing as ornate as Samantha, but still pretty!) just by adding a few characters such as * \ [ ] or ().  I call them "easy glyphs". Download all four of these cheat sheets as a pdf file, here.  If that link does not work (too much traffic) Try This One. Links to download each font are found under the photos. MF I Love Glitter        Smell The Roses            Shorelines        Stea        klcupid          Daddy's Girl             Beauty & The Beast          Ribbons & Banners            LillyBelle          Anjelika Rose Lovely Day             Yessy        Flotta            Veni    Love Hearts      Unicorn Giggles      Make Magic Happen                 Broken Heart         Awesome Birds      Sweet Hipster           Vacatio
Posting Komentar
Baca selengkapnya

What Do I Need To Get Started With A New Cricut?

Which Cricut Should I Buy? I use the Cricut Air 2.  The Maker, which is the model newer than the Air 2, will also cut light wood, and fabric without bonding attached. (the air 2 will cut fabric if you use an iron on bonding material on it)  That was the only real difference I know of, and I don't need to cut light wood, so I went with the Air 2.  I probably would have been fine with the Air.  I think, from what I have heard discussed on facebook groups, the only real difference is the speed  - the Air 2 cuts faster.   Cricut has a comparison of all of their current models here: https://help.cricut.com/help/cricut-explore-difference What Else Do I Need ? 1. Facebook groups and Youtube.  Because the Cricut does not come with ANY instructions.  Nada.  There is one sample project included - a simple card.  And it's amazing to see the machine make it.  But when it's done...  You will need to search out what you want to learn.  Pinterest is also helpful, for ideas.  But you will
Posting Komentar
Baca selengkapnya

Using VLR To Remove HTV - Fixing A Cricut Fail

Cliff Notes: Buy VLR - Amazon is the only place I know of to find it. Apply to the back of the fabric.  Stretch the fabric.  Peel off the htv. Super easy.  Worked great! I love this pillow (second from the left), despite my mistakes in not welding the pumpkins to the truck...    But my husband and I did not get married in 1993.  That's when our twins were born.  We got married in 1991.  Yeah, I don't know what I was thinking either.  :-) VLR is something I had heard mentioned a few times on different facebook groups, so when I placed my last amazon order, I added a can to my order.  It has sat on the shelf ever since.  I was intimidated by it. Today, Design Space was down.  (Still is, actually...)  so it was a good time to try the VLR.  My first challenge was opening it.  Although I knew it couldn't actually be aerosol, when I saw I had to puncture the top (which the label says is plastic, but sounds more like metal when tapped) it made me nervous to use a hammer and nail. 
Posting Komentar
Baca selengkapnya